I have a Grizzly G6019 Mill with a H6087-H6098 DRO installed. Today I tried to calibrate the DRO (IAW page 64 pf the manual). First step is to push “ENT” to get to “LIN COMP”. I push ENT and nothing happens. The DRO seem to be completely functional otherwise.
I am off by 0.002 in 4 inches and for everything I do that will not be a significant problem, but any suggestions
Thanks Tom-C
I am off by 0.002 in 4 inches and for everything I do that will not be a significant problem, but any suggestions
Thanks Tom-C