- Joined
- Oct 21, 2014
- Messages
- 2,156
Ok Have a need for a ball turner to fit on a Jet10x24. Looking for suggestions/ plans for one that I can build. Have a little Sherline Mill do I do not have much to work with. Also limited on funds, as have spent my major funds and will be low for a while again. have some scrap metal and plan on hitting the local salvage for more if I can find any. would prefer once that I can use with the AXA tool post, rather than having to remove it to mount one. Would also like it to be able to make concave items as well,
I have a project that have been working on and now need to do this before I can go any further. I rounded one area by hand but was a pain and with this one needing to be on the end of the item would be very hard to do without the turner.
Any suggestions etc
ken
I have a project that have been working on and now need to do this before I can go any further. I rounded one area by hand but was a pain and with this one needing to be on the end of the item would be very hard to do without the turner.
Any suggestions etc
ken