- Joined
- Feb 19, 2016
- Messages
- 326
So I made some threaded bushings out of delrin. I decided I didn't need delrin plate, and that I could just make bushings. I'll drill a hole in the feed housing in the wall between the feed and electrical section and thread the bushing through.
I need longer bolts tho so I can use two nuts. One to hold the stud to the housing, the second to hold the cable and to give some extra distance between the male bushing and the housing. Don't need to be making any contact with the housing and blowing everything to smitherines...
View attachment 236826
View attachment 236827
View attachment 236828
What's delrins heat rating? Just in case I wind up with an issue with heat?
I like where you're going with this. I have no idea what Delrin can take as far as heat goes. Is it necessary to use copper studs for conductivity?