- Joined
- Sep 26, 2013
- Messages
- 408
Thanks John, the motor is reversible, last in service on a mill. And yes, all the sources I've seen say make sure there is no power before changing directions or the controller will be toast.
" ......you can cut a resistor (RPS3) to defeat the "turn pot to 0 before starting" feature." mattthemuppet
It is not necessary to turn the pot to 0 when using the inhibitor switch on this Minarik controller. I don't know if I can use a generic MC, I'll do some searching, but the Minarik is $83(generic MC $60+-?), includes a speed pot, and given the vid tutorials I'v seen a straightforward install.
Thanks guys,
Brian
" ......you can cut a resistor (RPS3) to defeat the "turn pot to 0 before starting" feature." mattthemuppet
It is not necessary to turn the pot to 0 when using the inhibitor switch on this Minarik controller. I don't know if I can use a generic MC, I'll do some searching, but the Minarik is $83(generic MC $60+-?), includes a speed pot, and given the vid tutorials I'v seen a straightforward install.
Thanks guys,
Brian
Last edited: