- Joined
- Sep 23, 2010
- Messages
- 280
Hello everyone, I recently picked up the bandsaw with coupuns for 179.00 . I put it together finding discrepencies in the Instructions but got it done. The saw had a couple rattles that I took care of and that is pretty much it. I flushed the gearbox and changed the gear lube. I am wondering what blades are out there that others have used with good luck? I cut a bunch of 1/8 wall 3/4 x 3/4 square tubing with it and it needs some tuning as far as square cuts but I will wait until I have a new blade to do that. This blade must have been welded by a drunk as it jumps at least a 1/8 inch evetytime it rolls around. Ski