Go to Harbor Freight buy two of the link belts.
Just an FYI for others who might be leary about the green link belts sold at Harbor Freight. They are Accu-Link brand made by Jason Industrial which are made in the USA. Many people don't realize that there are items sold by HF that are made in the USA.
I use Fenner Power Twist link belts on my lathe, air compressor, & bandsaw but I doubt there would be much if any at all significant difference in performance between the Power Twist & Accu-Link belts. Accu-Link belts are cheaper at HF than the Power Twist belts, only downside is that HF only sells one size (1/2"/4L).
DZ the Accu-Link belts HF sells are actually made in EEC (European Economic Community) says so right on the package. They seem of good quality, at $24 they are more expensive than the variable cogged made in USA belts I got from Napa auto parts.
Guess I will have to make a trip to HF in the near future. Their website lists one 5' belt for $25. Will one be enough to replace both belts? One thing I don't have is a problem with vibes so just curious if I will notice any difference with sound...
I'm surprised your bandsaw didn't benefit, wait metal or wood? My 19" wood has some vibration I'm hoping goes away with a link belt, its not bad but could be improved.
Guess I will have to make a trip to HF in the near future. Their website lists one 5' belt for $25. Will one be enough to replace both belts? One thing I don't have is a problem with vibes so just curious if I will notice any difference with sound...