- Joined
- Sep 2, 2013
- Messages
- 5,397
While towing this JD trencher from the back to the front of the shop I managed to graze the muffler with the loader bucket. Didn't leave a mark on the muffler, but snapped the the manifold off right at the outlet. Did a spark test, and it turned out to be cast steel, so V'ed it out, pre-heated, and welded it up in three passes penning it betwixt passes. Very tight areas to get to with the mig, but got her done. Made it look pretty (head porting practice) And on to the next issue. Mike