Walmart Clear Ketchup Bottle Tip

racecar builder

Registered
Registered
Joined
Dec 19, 2011
Messages
459
HMer's
i've got another one on my list.
i'm going to use it for 30 wt oil to
pour down sparkplug hole of
3 briggs & strattons that have been sitting.
at my go to local machine he has one in
bathroom for hand soap.
i've got two. one's vegetable oil for shredder and
the other one looks suspiciously like 30 weight oil.
i'll have to check it.
grab a couple while your there for 68 cents each
and you should find plenty of uses for them
around the shop.

Have A Nice Day!
 
HMer's
stuff like this is great.
like when i used pepsi 2 liter carrier flat to
store my 440 rods and piston assemblies to rebuild engine.
that was oil in bottle i have.
i had to SMELL it after smelling bottle of oil to figure it out.
looked a little thin to me.:)

Have A Nice Day!
 
Just be sure not to put any on your fries. ;)
I have a mayo plastic bottle for cutting oil, works pretty good.

Paul
 
Another 'bottle' tip, 500ml or 1liter plastic pop bottles, pin-prick a hole in the top, and voila! a homemade coolant applicator and by the size of the hole, you can control the flow rate.

Cheers,
Chazz
 
ain't insane & chazz
another 'Cheapskate Classic' is 5 gal pails to sit on.
especially since they have done away with
aluminum lo boy chairs.
the ones with plastic webbing and aluminum armrests.
were about $5.99 each.

Have A Nice Day!
 
Back
Top