-
Welcome back Guest! Did you know you can mentor other members here at H-M? If not, please check out our Relaunch of Hobby Machinist Mentoring Program!
Tool organization with Gridfinity
- Thread starter DavidR8
- Start date
- Joined
- Jan 31, 2016
- Messages
- 12,869
Those drawers look somewhat like my Vidmars . 
The emphasis is the word " somewhat " ! 
Just finished up an oil change on the son's 4runner . The last person doing the change broke off the skidplate 8mm bolts . GD were those things stuck for a new truck . Anyway drilled them out , retapped M8-1.25 and have stainless hardware coming . Removed all the remaining bolts and never seized them all .
Back to the point . I found everything pretty easily in the Vidmars today , so progress is being made .
The emphasis is the word " somewhat " ! Just finished up an oil change on the son's 4runner . The last person doing the change broke off the skidplate 8mm bolts . GD were those things stuck for a new truck . Anyway drilled them out , retapped M8-1.25 and have stainless hardware coming . Removed all the remaining bolts and never seized them all .
Back to the point . I found everything pretty easily in the Vidmars today , so progress is being made .
- Joined
- Oct 16, 2019
- Messages
- 6,873
36 minutes. It’s almost hollow so very little infill.
- Joined
- Nov 13, 2024
- Messages
- 4
Hi. Is this on a regular 3D printer? And if it's on an SLA, how long will it take?
- Joined
- Oct 16, 2019
- Messages
- 6,873
Yes, I have a Sovol SV06. Takes maybe 35 minutes to print. I am running Klipper which increases print speed pretty significantly.