Timken Bearings???

[Kroll]

Guys I am looking for Timken bearings for my Sears lathe 101.28910 which is 10-A-11c and 10A-9c was wondering who has the best prices?I have purchase items from Clausing and I'm sure they would have them but are they bout the same as other bearing places??Tks----kroll

 

[kd4gij]

Get the number of the bearing and races first then call your local auto parts.

 

[Richard King]

For machine tools buy Industrial grade bearings. I have found the following company to sell good quality bearings and they are priced right.
http://www.bearingsinc.net

Company	Bearings Inc.
Address	N96W15508 County Line Road Germantown WI 53022 USA
Phone	262-253-6300 800-457-3329
Fax	262-251-6229
Email	orders@bearingsinc.net

 

[Kroll]

Don't call Clausing asking for a price on Timken bearings,more than what I paid for the lathe and it was not cheap.OUCH!!!!!!!---Thanks guys ----kroll

 

[Ulma Doctor]

i have one of the bearings, if you still need it...
i can dig it up .
shot me a message if you still need it.

 

[Uncle Buck]

Generally speaking most bearings for Atlas machines are standard sizes that are easily sourced without going back to Clausing and getting fleeced. I think that applies to most all Atlas machines too!

 

[wa5cab]

Timken part numbers for the Atlas 10" and 12" are:

14276B
16150
16284B
14125A

Flanged cups aren't common. The best prices I found for non-counterfeit Timken was from

Rowe & Co. Inc.
PO Box 467
Johnsonburg, NJ 07846

A set cost $132.05.

The bearings were drop-shipped from a Timken warehouse in KY. I wouldn't buy anything critical from O'Reilly.

Robert D.

 

[Kroll]

Boy, at first after goolging these numbers I thought I hit the mother load then I keep reading till I hit this post here http://groups.yahoo.com/group/atlas_craftsman/message/29981 now I think I understand what the differences is.By the way Clausing was 644 per set---kroll

 

[Uncle Buck]

Boy, at first after goolging these numbers I thought I hit the mother load then I keep reading till I hit this post here http://groups.yahoo.com/group/atlas_craftsman/message/29981 now I think I understand what the differences is.By the way Clausing was 644 per set---kroll

Very interesting. I would keep that in mind and buy mine from an industrial bearing supply company myself.

 

[wa5cab]

Hmmm. Without calling Timken, does anyone know what the suffix -20024 following the basic bearing number means. That's printed on all four of the boxes I have.

Robert D.