I'm considering controlling the feed on my 109 with a stepper motor and I have a few questions.
1. What size stepper and controller do I need? I did this on a Unimat with nema 17 stepper but the 109 requires considerable amount more force.
2. Should I remove the gear from the change gears so it is easier to drive?
Thanks; Don
1. What size stepper and controller do I need? I did this on a Unimat with nema 17 stepper but the 109 requires considerable amount more force.
2. Should I remove the gear from the change gears so it is easier to drive?
Thanks; Don