. I've had a 3 point hitch scraper box for years and always hated how it lifted when the tractor went over a bump. I had a building pad to put in for my new building and got to thinking.
Here's the result, front is attached to the 3 pt with a pintle hitch which lets it twist on uneven ground and let's you raise and lower the front.
The rear wheels which are controlled by a hyd cylinder ran from the bucket tilt circuit.
The only thing I bought was the hyd hoses the rest was already here in big sky storage. That's what the new building is for. Here's the pics. Thanks ron
Here's the result, front is attached to the 3 pt with a pintle hitch which lets it twist on uneven ground and let's you raise and lower the front.
The rear wheels which are controlled by a hyd cylinder ran from the bucket tilt circuit.
The only thing I bought was the hyd hoses the rest was already here in big sky storage. That's what the new building is for. Here's the pics. Thanks ron
