-
Welcome back Guest! Did you know you can mentor other members here at H-M? If not, please check out our Relaunch of Hobby Machinist Mentoring Program!
SB9 thread dial
- Thread starter Jim F
- Start date
- Joined
- Feb 2, 2013
- Messages
- 3,963
@brino
had a great write up here:
www.hobby-machinist.com
had a great write up here:
Collaboration on a 3D printed threading dial for a SouthBend 9C
I have been slowly learning about 3D printing and have printed a number of useful parts, but have not printed anything that wears against another part. I have read about printed change gears for a lathe (https://www.hobby-machinist.com/threads/if-you-need-gears-print-them.65634/), and was...
www.hobby-machinist.com
- Joined
- Jan 2, 2014
- Messages
- 9,348
@Jim F,
I'll even make you the same deal!
If you want to try a 3D-printed threading dial, all I ask is an honest review of how it works and how it holds up.
I have the printer, I have the filament, I have the model.
All I have to do is start it up and go to bed while it prints, and then get it in the mail.
I'd want to set reasonable expectations; I could print it within a week and send it out.
Feel free to PM* me with any questions, and your address if you're in.
-brino
* PM = Private Message; hover over my avatar and hit "Start Conversation"
I'll even make you the same deal!
If you want to try a 3D-printed threading dial, all I ask is an honest review of how it works and how it holds up.
I have the printer, I have the filament, I have the model.
All I have to do is start it up and go to bed while it prints, and then get it in the mail.
I'd want to set reasonable expectations; I could print it within a week and send it out.
Feel free to PM* me with any questions, and your address if you're in.
-brino
* PM = Private Message; hover over my avatar and hit "Start Conversation"
- Joined
- Jan 2, 2014
- Messages
- 9,348
@RWanke,
That's great news, and I was glad to be part of this experiment.
Thanks for the update!
-brino