Road Race Car Build

racecar builder

Registered
Registered
Joined
Dec 19, 2011
Messages
459
i'm totally stoked about this!
so excited it's hard to figure out where to start telling about it.
i guarantee you it's in motion.

Have A Nice Day!
 
Last edited:
treadheads

let me tell you concepts.

1 flower box.like a porch planter or window sill planter.

2 u-shaped porch on a house or sometimes called a horsehoe or wraparound porch.

i'll pull this together next post.it's neat!:)

Have A Nice Day!
 
Last edited:
sic
here's an LA answer
'you be you and i'll be me.'

Have A Nice Day!
 
Last edited:
tread heads
the flower box concept.
50's midgets are built 'flower box' style.
tubing frame is a big rectangular box section.

then you put on these fiberglass parts:
1 nose cone
2 hood
3 roll bar/tail

now don't get too into midgets, i'm going to pull a switch on this next.

Have A Nice Day!

Edmunds Nose.jpg
 
home machinists
that was the 'flower box' method of building.
that's my own term. just long rectangular box shaped chassis.

these following 2 methods are generally accepted.

'double tube'.
where early builders just replaced frame rails with double tubes.

'space frame'
four or more longitudinal tubes.
mine's going to be space frame.

note: i will be starting to build 1/4 scale model of frame/chassis.
in about 1 week. will post pic's.

bob
 
tread heads

ordered Basswood today from Hobbylinc

to build scale model of space frame

Have A Nice Day!
 
car builder's

the plug has been pulled on this V8 build!

got reminded i'm supposed to be buying

Porsche/VW 2.0 engine & manual trans this guy.

Have A Nice Day!
 
Back
Top