- Joined
- Oct 30, 2012
- Messages
- 19
OK here is my fun project. I had an old lawn tractor with a blown motor, so I stripped it down, borrowed the horizontal shaft motor from my old tiller, and the Redneck puddle jumper is born. I purchased the sprockets and flange bearings from McMaster Carr and did a lot of research on how I wanted to arrange the gear ratio. It turns out that it runs around 10~15 mph, but the real fun is how it pulls and climbs hills and goes through puddles. I decided to keep the speed down so the kids wouldn't roll it and get me in trouble with the wife so this works out for everyone.
View attachment 98204
View attachment 98204