Power Needed to Remove Metal in a Lathe

[BluCab]

There is an interesting article in this months Houston Metalworking Club Newsletter:

http://www.homemetalshopclub.org/news/11/newsletter1111.pdf#Page=6&view=fitH

by Dick Kostelnicek Where he uses a Kill-a-Watt to measure the power required to remove metal on his lathe.
http://www.homemetalshopclub.org/news/11/newsletter1111.pdf#Page=6&view=fitH

 

[ScrapMetal]

Very interesting, thanks for posting that.

-Ron