Oil seal help

mirage100

mirage100

Active User
H-M Lifetime Diamond Member
I need help on finding a oil seal . Can any one tell me where I might find some help. I have looked a McCmaster Carr but they don't have the size.This is a rubber oil seal Shaft size is 0.750 diameter is 1.060 and heights 0.160. ANY help would be Great. Stay safe.
 
Any bearing store should be able to help you, try Motion Industries, Google "oil seal" and your dimensions, probably come up on E-bay.
 
This looks pretty close:

CR Seals (SKF) 7413

Buy CR Seals (SKF) 7413 Single Lip Grease Seal - Solid, 0.750 in Shaft, 1.062 in OD, 0.188 in Width, HM14 Design, Nitrile Rubber (NBR) Lip Material at Motion Industries. Keeping Your Industry In Motion Since 1972!
www.motionindustries.com www.motionindustries.com

Ted
 
19mm x 27mm x4mm is common and should work
.748" x 1.063 x .158
 
Last edited:
I got the seals that I ordered . I thought I was ordering butylene rubber seals. I got metal seals with rubber inserts . These are going in a chainsaw engine. .I was think about trying these with gasket sealer around the metal part of the seal. Anyone got a opinion on this as far as it working. Does anyone know where I can get rubber seals? I found them at Motion but there sight says they have to be ordered and when I try to order them I get nothing. Thanks for any and all help. everyone stay safe.
 
Try the dealer where the saws are sold.
Whatever brand saw it is might have its own proprietary parts numbering system.
Any numbers on the original seals??
 
Metal casing on seals is very common. They are just a press fit into the recess/pocket that is machined into your part. They typically need no sealant.

Ted
 
You must log in or register to reply here.
Back
Top