Need a 3/4-10 LH nut

[Canus]

Picked up a Baldor buffer at an auction that is missing the 3/4-10 LH nut that goes on the left side. Will gladly pay a reasonable price and shipping if someone has an extra lying around they don't need. Thanks in advance for any assistance.

 

[WobblyHand]

Sure it's a 10 thread? My carbide grinder uses 16 TPI. I have a few 3/4-16 LH nuts, had to buy a small bag of them and only needed 1.

 

[deakin]

mcmaster.com

 

[WobblyHand]

3/4-10 LH @ McMaster 10 for $11.00.
3/4-16 LH @ McMaster 10 for $10.65 <-- I have spares of these.

 

[Canus]

Thread is 10 TPI. Aware that McMaster has them but only need 1 and their shipping kills the deal for me. Will look around locally and see what I can find.

 

[darkzero]

only need 1

Do you have a local Fastenal? You should be able to buy just one, cheaper than buying bulk from where ever, but still expensive for just a single nut.

https://www.fastenal.com/product/details/36915#
https://www.fastenal.com/product/details/0169186

Do you have a lathe capable of threading & hex stock (or a mill if no hex stock)? Not too hard to make. I'd probably just buy one too if the cost is reasonable but that's what most us hobbyist do sometimes, make stuff that would cost us more time & money than to buy.