- Joined
- Sep 28, 2013
- Messages
- 40
My Sherline micro mill is set up and I am trying it out. I have screwless vises, a Sherline 4x10 tooling plate and need a milling vise. Ebay had a used PHD air vise which would fit the tooling plate. I disassembled it so it has the valve body, tooling plate and 7.00 x 0.790 guide rods.
Has plenty of mounting holes and is solid aluminum. Those are the main parts for my milling Vise Project. This is a small bench-top mill so mostly aluminum or brass parts. Hobby stuff.. Fly-reels.
What are your thoughts about a convertible or adding another jaw to the front side? For small parts or my 1" machinist vise and also my 3" one.
I can salvage or buy or make the necessary screws. I have the Sherline lathe with threading attachments. Here are some pix... What Could You Do With This Stuff?
Thanks in advance
Has plenty of mounting holes and is solid aluminum. Those are the main parts for my milling Vise Project. This is a small bench-top mill so mostly aluminum or brass parts. Hobby stuff.. Fly-reels.
What are your thoughts about a convertible or adding another jaw to the front side? For small parts or my 1" machinist vise and also my 3" one.
I can salvage or buy or make the necessary screws. I have the Sherline lathe with threading attachments. Here are some pix... What Could You Do With This Stuff?
Thanks in advance