-
Welcome back Guest! Did you know you can mentor other members here at H-M? If not, please check out our Relaunch of Hobby Machinist Mentoring Program!
- Joined
- Jan 2, 2014
- Messages
- 9,105
Hi @Tinmuk,
It looks like you have a challenge ahead.
I search a few sites (here, Lathes.co.uk and vintagemachinery.org) for info on Mikron 132 and found nothing.
It looks like an interesting machine!
One reference pointed over here:
http://meshingwithgears.us/wwwboard/wwwboard.html
see also:
http://www.meshingwithgears.us/faq.htm#(F2)
Good Luck!
-brino
It looks like you have a challenge ahead.
I search a few sites (here, Lathes.co.uk and vintagemachinery.org) for info on Mikron 132 and found nothing.
It looks like an interesting machine!
One reference pointed over here:
http://meshingwithgears.us/wwwboard/wwwboard.html
see also:
http://www.meshingwithgears.us/faq.htm#(F2)
Good Luck!
-brino
Hi Brino,
I have been to those sites. Like you found, these is little info available. I understand the basics of hobbing and succesfully made some gears. But I know there is a lot to still learn!
Figuring all the change gear ratios is tricky. I made a spreadsheet to help calculate the proper ratios, but I dont have a full set of change or feed gears. I am going to start making my own now that I have a Mod 1.25 hob
I have been to those sites. Like you found, these is little info available. I understand the basics of hobbing and succesfully made some gears. But I know there is a lot to still learn!
Figuring all the change gear ratios is tricky. I made a spreadsheet to help calculate the proper ratios, but I dont have a full set of change or feed gears. I am going to start making my own now that I have a Mod 1.25 hob