Need a few dies in HSS only , not carbon.
I could use these, I have none.
M10x1.25
M12x1.5
3/8-24
7/16-14
1/2-13
Always can use an extra 1/4-20 ... or 1/4-28 die .
I don't have spare dies in M8 , M10, M12 so I could use an extra but I need the above first.
The only tap I don't have a spare in is M10x1.25
------------------------------------------------------------
I have extra spares of these taps to trade. These are all USA HSS and a few Japan HSS, no junk
M12x1.25 4 flute Bot , HSS
M14x1.5 HSS 6 flute bottoming, then have 2 tapered start threads
5/16x18 HSS plug taps
9/16-18 HSS taper and bottom
3/4-10 HSS taper tap
These end mills I have a bunch of spares also. They are all new, NOS, no junk.
3/8" diam Ball end mill 4 flute HSCo
7/16 2 flute M42 (8% Cob) Regal Beloit , regular end mill, not Ball end
5/8" end mill , 4 flute, these are T15 steel , CPM-T15 specifically
Could use some larger diameter M42 Ball , chamfer or roundover end mills.
Not looking to sell or "cash in" on any of this ...maybe just trade for ones I don't have
or don't have spares of .
