Lodge and Shipley 18x60, Sacramento, CA $500, some assembly required

[guero_gordo]

lodge and shiply lathe 18x60 project - tools - by owner - sale

Lodge and Shiply lathe 18x60 project needs rust removed and cleaned up I think I have all of it is part way taken apart but has 4 jaw ,faceplate, gear covers and a large pile of tooling Been sitting...

sacramento.craigslist.org

 

[benmychree]

Scrap iron.

 

[Norseman C.B.]

Too far gone....................

 

[benmychree]

Not to mention, way overpriced for junk value.

 

[markba633csi]

I second John, scrap iron, not modern enough (for me anyhow) and overpriced
I see apron but no proper carriage- some homemade goofy mess

 

[benmychree]

Also a bit of scrap steel ---

 

[vocatexas]

Depends on whether there is pitting from the rust. I've got that lathe's big brother sitting in my shop. Mines about twice as long. It's a Patent Head from about 1912. Those gears and tooling would clean up pretty nicely in Evaporust, I'd bet.

 

[guero_gordo]

yeah, I know enough to not post something with obvious pitting, but of course it could be revealed on closer inspection. Stored outdoors in CA isn't necessarily a death sentence, but it certainly isn't beneficial anywhere

 

[hman]

"Condition: Fair ... I think I have all of it" Yeah, right!