Hung up my chucks

[DavidR8]

Spent a bit of time getting my chucks organized.
Nothing fancy but it works.

 

[Flyinfool]

That works, All mine are eating shelf space.
I see a copy job coming........

 

[SLK001]

Be mindful of your back when you remove them. Remove them standing directly in front of the rack - do NOT reach over your bench. Ask me how I know.

 

[NCjeeper]

I would probably need a 4x6 to hold mine up in the air.

 

[DavidR8]

I would probably need a 4x6 to hold mine up in the air.

Mine are just baby chucks. The 4-jaw is only 6” diameter.

 

[DavidR8]

Be mindful of your back when you remove them. Remove them standing directly in front of the rack - do NOT reach over your bench. Ask me how I know.

I hear you there! Having injured my back once I’m very careful when lifting anything.

 

[DavidR8]

That works, All mine are eating shelf space.
I see a copy job coming........

I angled the holes for the dowels 2 or 3 degrees upward. Not that I expect them to fall off on their own but it seemed like a good idea.

 

[C-Bag]

That’s nice. In my shop they would be dusty and rusty in no time. Mine live in the bottom drawer under my lathe, away from the dust and salt air.

 

[DavidR8]

That’s nice. In my shop they would be dusty and rusty in no time. Mine live in the bottom drawer under my lathe, away from the dust and salt air.

I'm only two miles from the ocean but we don't seem to have issues with salt air. I have no idea why.

 

[AGCB97]

I needed them out of the way so put casters on a piece of 3/4 plywood that slides easily under the chip pan. Easy to throw something over it also but I don't.
Aaron