I've been looking for a good quality lathe radius cutting tool for my lathe and found this on the "bay". Seller offered it to me at half off, so I jumped on it.
Seller says there's no manufacturing marks on it at all but I find it hard to believe it's a home made piece being that it's a casting.
Seller's description:
Lathe Radius Cutting Tool
Unknown Manufacturer
Base 9.5" x 5.75"
New Bearings Greased and Installed
5.0" Center Height to 1/2" Tool Holder Bore
(2) 7/16" Bores 1 at 5-5/8" and Other at 7.875"
Very Good Condition
Any ideas?
Thanks in advance!
Seller says there's no manufacturing marks on it at all but I find it hard to believe it's a home made piece being that it's a casting.
Seller's description:
Lathe Radius Cutting Tool
Unknown Manufacturer
Base 9.5" x 5.75"
New Bearings Greased and Installed
5.0" Center Height to 1/2" Tool Holder Bore
(2) 7/16" Bores 1 at 5-5/8" and Other at 7.875"
Very Good Condition
Any ideas?
Thanks in advance!
