Greenfield #15 tap wrench- length?

[markba633csi]

Does anyone have a wrench like this? How long is it from end to end? I'm hoping it's about 10" or more
A bit pricey at 65$ but worth it in my opinion
-Mark

 

[Uglydog]

These actually aren't that difficult to make.
The don't have to be this configuration to work well.
If you have the $65 great.

Or, travel to the scrap bin and make one.
This hobby doesn't need to be well funded to be safe have fun and do good stuff.
In truth today I started making one for a large hand reamer I'm using to make bushings. Opening in the body needs to be 1.25inches per side....
It's a big one.

Daryl
MN

 

[markba633csi]

I hear ya Daryl but I have a T-handle GTD from my dad and I wanted a matching GTD long one for big taps, 12" or longer
I don't often splurge on tools but on this I would. GTD stuff is the best
-Mark

 

[Stonebriar]

A number 15 is 11" long

SKU:	Size	For Machine Screw Size	For Tap Size (in)	For Tap Size (mm)	For Pipe Size	OAL (in)	OAL (mm)	Pack Qty	Min Qty
C67201	#00	#0 to #14	1/16" to 1/4"	M1.5 to M6.3	-	5.0000	127.00	1	1
C67197	#14	#0 to #14	1/16" to 3/8"	M1.5 to M10	-	9.0000	228.60	1	1
C67202	#5	#8 to #14	5/32" to 1/2"	M4 to M12.5	1/8	11.0000	279.40	1	1
C67203	#6	#8 to #14	5/32" to 3/4"	M4 to M19	1/8 to 1/4	15.0000	381.00	1	1
C67204	#7	-	1/4" to 1-1/8"	M12 to M28	1/8 to 3/4	19.0000	482.60	1	1
C67205	#8	-	3/4" to 1-5/8"	M19 to M40	3/8 to 1-1/4	40.0000	1,016.00	1	1
C67200	#22	-	1" to 2-1/2"	M25 to M56	3/4 to 2	54.0000	1,371.60	1	1

 

[mmcmdl]

How many do you need ?

 

[benmychree]

How many do you need ?

Well, all of them, of course!

 

[mmcmdl]

I have quite a few .