- Joined
- Aug 29, 2019
- Messages
- 1,166
Yep putting her work clothes on. I'm in the process of adapting this old 4-way Logan tool holder to my Clausing 5913 lathe. I'm also showing how I check tool hight in relation to spindle center. A gazillion ways to do it but this is My way. I hate it when you are trying to face an object off in the lathe and leave that little nub. this way I have never left even a trace of a nub. After doing this measuring I faced .100 off the bottom of the spacer in my old Clausing 100 lathe. I also cut a .020 deep relief 2 " in diameter. This way all 3 components will be in compression when I tighten the Tee Nut/Bolt.
