This is my first post so I thought I a would add my Atlas/Clausing lathe to the list. It is a 12 X 36 with Quick Change, Cabinet and Timken Roller bearings. Model #3996 Serial #105153. I bought it off of ebay 10+ years ago and added a Trav-A-Dial. The ways are in excellent condition. I have no historical information on it, so any additional info would be appreciated.
-
Welcome back Guest! Did you know you can mentor other members here at H-M? If not, please check out our Relaunch of Hobby Machinist Mentoring Program!
First Post
- Thread starter maspann
- Start date
- Joined
- Oct 18, 2016
- Messages
- 2,872
Welcome to the group!
Welcome aboard and what a nice looking machine!
According to the below link your lathe was also baged as a Craftsman 12 inch lathe.
http://www.lathes.co.uk/atlas/page4.html
And hear is a manual for it that you can download.
http://vintagemachinery.org/pubs/detail.aspx?id=6137
http://vintagemachinery.org/pubs/222/6137.pdf
According to the below link your lathe was also baged as a Craftsman 12 inch lathe.
http://www.lathes.co.uk/atlas/page4.html
And hear is a manual for it that you can download.
http://vintagemachinery.org/pubs/detail.aspx?id=6137
http://vintagemachinery.org/pubs/222/6137.pdf
- Joined
- Aug 1, 2019
- Messages
- 361
Welcome, I like your rack for your quick change tool holders!
Richard
Richard
Richard,
They have been quite useful. They were easy to make from some 1 1/2" wide X 3/16" thick and 2 1/4" long flat stock welded to a piece of tubing and mounted to my bandsaw out feed table which is directly behind the lathe.
Mark
Attachments
- Joined
- Jan 31, 2016
- Messages
- 12,893
Welcome to the site and that's a nice 3996 . I sold mine a few months back to another member on here but haven't heard back or seen him lately on the board . They were a capable lathe and it looks as though you have a nice one . 
