- Joined
- Jul 20, 2012
- Messages
- 1,263
I have a Manchester parting tool 250-177. It has a .312 width. Where do I find the inserts for it?
-
Welcome back Guest! Did you know you can mentor other members here at H-M? If not, please check out our Relaunch of Hobby Machinist Mentoring Program!
Finding parting insert Manchester 250-177?
- Thread starter Cadillac STS
- Start date
4
4GSR
Forum Guest
Register Today
Pull up the Master catalog Widia on pape A6, you will find the tool holder at the bottom of the list. Just below that will be information on where the inserts are found.
http://www.widia.com/content/dam/ke...talogs/WidiaManchester_masterCat_2008_sec.pdf
Good luck on locating inserts. Once you find the number on the insert, scan eBay and see what you can on one you can purchase there. Those inserts can go for as high as $25 each! Ouch!
http://www.widia.com/content/dam/ke...talogs/WidiaManchester_masterCat_2008_sec.pdf
Good luck on locating inserts. Once you find the number on the insert, scan eBay and see what you can on one you can purchase there. Those inserts can go for as high as $25 each! Ouch!