Cl Findes

[dlane]

hi all I've been picking thru tools listed on cl for a while now here are some the finds These are just a few of the things I've gotten the qctp and holders aloris cxa is way big for my lathe and a little rusty he gave them to me free I'll get them cleaned up and sell them. The second pic was $50. I think I did good. More to come
Derrick

 

[toag]

if i didnt have my heart set on a multifix... i'd be sending cash your way for the aloris

 

[Cactus Farmer]

what does pic 6 do? Ball/radius maker?

 

[kd4gij]

Quit the haul there. Lots of good stuff there. Oh and on the cxa Looks like it is time for a bigger lathe.

 

[jtrain]

I also wonder what the item is in picture 6. I'm with Cactus Farmer as a radius/ball turner. Is it crank operated?

 

[brino]

Wow....great finds.

Item 6 looks like it could do outside radius cuts (ball) or inside radius (cove) cuts.

It was very hard to find a decent anvil out my way, too many ASO's (anvil shaped objects) with paint on every surface faces as soft as play-doh.

What's the make of that horizontal/vertical collet indexer?
Is is 5C or something else?

Was item 3 sold as a kiln or a heat treating oven?
Either way I can think of dozen of uses.....
What make and temp range?

Almost enough to want to move from CA (country code Canada) to CA (state California)...........

 

[dlane]

Hi all , the 5c collet indexer is hardinge ,the anvil is hay budden , the kiln was given to me and have not got a chance to look it over yet forgot the name if it needs to much work I'll convert it to a forge . I picked this stuff the day before I left for Texas "we're I am now" so didn't get a chance to go thru things very well ,had to pack , when I get home next week I'll be going thru it all and let you all know.
Before I left I put the aloris cxa and a bunch of Albright drill chucks he gave me in diesel to stop the rust while I'm gone,
The aloris and tool holders weren't too bad should clean up good but the Albright chucks may be to far gone x5 .
Yes I beleve pic 2-4 is a radius turner ,has no name but well made the crank handle rotates the cutting tool , my lathe with the kdk tool post only takes 1/2" tools so it'll have to be modified or a tool holder for use by me. He pretty much gave me the rusty stuff and the aloris cxa I'll clean up and sell as it won't fit my lathes . The burs are diamond w 1/4 " shanks
Get back to youall in a few days
Derrick

 

[dlane]

Unfortunately the chucks were in a area of shed where the roof leaks, his dad passed away 2years ago and this stuff sat there till now , he sold about half of the tooling to a guy for $20,000 a lot of carbide inserts and high end tooling and I've Ben picking the rest for cheep as he is trying to clean out dads old place to sell it.
Derrick

 

[Ulma Doctor]

These are just a few of the things I've gotten the qctp and holders aloris cxa is way big for my lathe and a little rusty he gave them to me free I'll get them cleaned up and sell them. The second pic was $50. I think I did good. More to come
Derrick[/QUOTE]


YOU SUCK!!!!!!
excellent pickin' there!!!

 

[kd4gij]

Thanks for finding that stuff for me. I sent you a pm with where to ship it to.