I hope nobody minds me bringing the old post to the top, especially for a newbie here. I'm just now getting into some machining. I am a degreed engineer, but my history is around designing, not actually making. I've had access to but not really used various equipment much. I'd say with my knowledge combined with my casual usage, I'm beginner/intermediate level at best. I do own several pieces of equipment in the form of mills and lathes. About 10 years ago I purchased a large lathe and a horizontal mill from where i'm employed. Both pieces were in excellent shape but rarely used anymore since a company this large replaces equipment when its off the books. I gave them to my dad who was a machinist in the army in the late 60s (Vietnam). Unfortunately he contracted COVID last fall and didn't survive. Anyway, I'm looking to sell the mill and I came across this forum and this post. I know its almost taboo for a 1 post guy to list something for sell on the 1st post, so that's not what I'm doing. I'd just like some information from some guys more knowledgeable than me. Basically, I don't know what the thing is worth. Its a Cincinnati Cinova 80 205-12. Along with it is all the vise, tooling tooling cabinet, etc. we had for it. I'm looking at the above post and the one I have looks to be probably newer and is powered up ready to use. Here is a quick picture of it..... Any help would be greatly appreciated. I also have at least 2 smaller lathes I will be selling.
