- Joined
- Feb 2, 2013
- Messages
- 3,709
i found some treasure again!!!!!!:nuts:
surfin the site that rimes with Gbay, if found a trove of gems.
the price was beyond reasonable (down right cheap is a little more accurate)
Including:
A 7th Edition American Machinist Handbook{Colvin & Stanley} (1940)
2 Kennametal Slide Chart Feed/Speed Calculators
A Lufkin tap/drill/speed Circular Chart
7 Pocket Conversion Charts (Decimal/Fraction, Drill/Tap, etc)
a picture of the haul for the interested!
![books & chart cards.jpg books & chart cards.jpg](https://www.hobby-machinist.com/data/attachments/45/45614-c68c27587b99c57fa1b46918fa497fe8.jpg)
as always thank you for reading and participating in the forum.
mike
)
![books & chart cards.jpg books & chart cards.jpg](https://www.hobby-machinist.com/data/attachments/45/45614-c68c27587b99c57fa1b46918fa497fe8.jpg)
surfin the site that rimes with Gbay, if found a trove of gems.
the price was beyond reasonable (down right cheap is a little more accurate)
Including:
A 7th Edition American Machinist Handbook{Colvin & Stanley} (1940)
2 Kennametal Slide Chart Feed/Speed Calculators
A Lufkin tap/drill/speed Circular Chart
7 Pocket Conversion Charts (Decimal/Fraction, Drill/Tap, etc)
a picture of the haul for the interested!
![books & chart cards.jpg books & chart cards.jpg](https://www.hobby-machinist.com/data/attachments/45/45614-c68c27587b99c57fa1b46918fa497fe8.jpg)
as always thank you for reading and participating in the forum.
mike
![books & chart cards.jpg books & chart cards.jpg](https://www.hobby-machinist.com/data/attachments/45/45614-c68c27587b99c57fa1b46918fa497fe8.jpg)