Bar/Rod bender parts dimensions

[Charley Davidson]

Benny gave me a Pittsburgh/Harbor Freight bar & rod bender with most of the dies missing, if any of you have one of these I need the dimensions for the 2 stop blocks, one is square with an offset hole the other is triangle. I need a drawing with dimensions. Thanks in advance

Charley

 

[Uglydog]

Check out: http://www.swagoffroad.com/Metal-Fabrication-Tools-_c_7.html

Daryl
MN

 

[bcall2043]

Not sure about dimensions but below are links to the manual for your machine and for a site with drawings for building a similar bender:
http://manuals.harborfreight.com/manuals/38000-38999/38470.pdf
https://docs.google.com/file/d/0B2y...RmZS00NTAxLTlkMGYtNGMwNTY4MzNhYjUz/edit?pli=1

The drawings might get you close enough that you can fill in the blanks.

Benny
The Orphanage Never Closes

 

[furpo]

I have this bender if it will help you?
http://www.harborfreight.com/compact-bender-38470.html

 

[Charley Davidson]

Thanks guys, Bob Beckett sent me a drawing with measurements and a few pictures of the 2 pieces I need. I made a 3" die last night & if I can locate material I'll make both blocks today.