Atlas 10F MOLO

[SightlessSeer]

Does anybody have a digitized version of the Atlas Manual of Lathe Operations for the Atlas 10F? I have a physical copy, but it would be nice to have a digital copy to reference and I cannot find one online. Vintage Machinery seems to have one for an Atlas 10D and a 12" Atlas, but I cannot find an Atlas 10F MOLO. Ideally, I would digitize my copy, but I don't have a scanner (or a printer for that matter). If anybody has a PDF, or similar that they are willing to share I would really appreciate that.

 

[LF_WS]

There's a detailed discussion of the history/contents of various editions of MOLO by Robert Downs at:
https://groups.io/g/atlas-craftsman... Lathe Operations (MOLO)/MOLO HistoryRev5.pdf

Check it out if you haven't seen it - will probably tell you just which version you need.

 

[SightlessSeer]

There's a detailed discussion of the history/contents of various editions of MOLO by Robert Downs at:
https://groups.io/g/atlas-craftsman/files/15 Atlas Manual of Lathe Operations (MOLO)/MOLO HistoryRev5.pdf

Check it out if you haven't seen it - will probably tell you just which version you need.

I haven't used groups.io before, so I don't have a login, but I'll check it out. Thank you!

 

[LF_WS]

I haven't used groups.io before, so I don't have a login, but I'll check it out. Thank you!

Copy is attached.

 

[SightlessSeer]

Copy is attached.

Thank you so much!

Going off of this, I have a 1937v4 copy. It's an earlier version with the white plastic binding, but is from before the "Price One Dollar" was removed from the Copyright page and chapter 9's tab was relabeled from "9 - woodturning" to "9 - woodworking". Apparently this version was issued up until 1954, which makes sense because my lathe seems to be have been built from 1946-1947 according to the database on HM (model TH54, serial number 078677).

I found this version in the HM downloads section, which is almost identical to mine, but the threading supplement (chapter 7) is different. This one seems to be for the Craftsman branded 12" lathe (threading chart and banjo drawings are different, but I didn't look into more detail for other differences after I found those).

So far, I haven't been able to find a 1937v4 PDF online. Apparently a 1954v6 has more or less the same info, but I haven't been able to find a copy of that yet either.