Acer Lathe

B

boydd

Registered
Registered
Need to replace my Jet 1349 lathe lost in a fire. Thinking seriously on upgrading to Acer 1440G or the E variable speed lathe .

Anyone have any advise as to which is preferred. I am leaning towards the G model mostly because it is a heavier machine. Can buy it with a Newell DRO FOR ABOUT $2500.00 extra installed.

Also need advise on purchasing a DRO for the machine. looking at the DROPro Electronica Kit mostly because of price.

Any other economical DROs to consider?
 
I don't know the lathe , but I have been very happy with DroPro system. There are cheaper units but DroPro has their act together on documentation, product quality and service.

Randy
 
Can't speak on that particular lathe, but I bought a new Acer 17 x 60" in 1997 and it still holds tenths and is a joy to run. If the one you are looking at is anything like mine, you won't regret the make. Mine is Non-Chinese, so I guess that would be a concern, but it's my impression that all Acer equipment is made in Taiwan. I chose Sony DRO, incidentally. Never a problem with any of it.
 
I upgraded from a 13X40 Jet gearhead lathe to the Acer 14X40 E-Lathe about 2 years ago. I purchased mine with the Newall DRO and the taper attachment. I have really enjoyed mine, a pleasure to run and very quiet. Last year I decided to look for a used knee mill but finally gave up and bit the bullet and bought the Acer E-Mill, 3 HP with Accurite DRO. All I can say is I am extremely happy with mine.

Don't think you would be disappointed.
 
You must log in or register to reply here.
Back
Top