96 tooth

[hss cutter]

looked in molo I cant seem to have any reference for 96 tooth gear on 10 f anyone got a pic

 

[Grinderman]

I wondered the same thing. There is a guy on eBay that has one. There is nothing in my threading supplement book for a 10" that uses that size gear.

 

[francist]

This may help.

Change Gears for 10D and F series lathes

This listing is a work in progress. I owned a 10D that had been converted sometime in it's history to 10F. This listing will allow the user to make Imperial and Metric threads This may not be correct for the 12" lathes towards the end of production like the 3996. These are the required gears...

www.hobby-machinist.com

 

[pdentrem]

The D version used the 96 while the later F did not. The F has a 16/32 compound gear behind the spindle that replaces those 96 gears. The topic linked to refers to this.
Pierre

 

[wa5cab]

That is correct. The Atlas 9" and 10" up through the 10D (when equipped for thread cutting) included two 96T gears in the standard threading gear set. From 10F and Craftsman 101.07402, 101.07382 and 101.07362 on did not. The original (Versions 0 and 1) MOLO includes a threading chart that includes the 96T gears. Versions 2 through 9 do not. And as Pierre mentioned, the later machines include a 16T/32T compound gear not found on the early machines.

 

[hss cutter]

yes that helped thanks guys.