6 holder tailstock turret needs collet for reamer holder

[ome]

Hi guys,
i managed to identify the 6 holders that came in the 18 piece set.
The only holder with a threaded top with about a .5 in hole had a tapered inside for a er collet
any idea what er collet would fit?
Thanks
jon

 

[Inflight]

do you have a set similar to either of these:

 

[ome]

do you have a set similar to either of these:

View attachment 61806

View attachment 61807

Yes, very similar, mine has 2 chucks also, but this piece with the hex nut top with the hole has a taper inside, not to big, cause my er 25 for my emco 7" is too big.
Any idea what suze collet will fit inside thAt piece?

 

[Inflight]

Any idea what suze collet will fit inside thAt piece?

Jon,
The images I posted were from a google search. Here is a link: http://www.arceurotrade.co.uk/Catalogue/Machines-Accessories/Lathe-Accessories/Tailstock-Accessories
The collet holder in the 2nd picture is for an ER-11 sized collet. You can easily make you own collet chuck with the arbor size you require but most people I know have purchased the Nut portion.

Matt