- Joined
- Jun 29, 2019
- Messages
- 63
I would greatly appreciate it if someone would provide me the bolt hole dimensions for the PM 1440GT base on the tail stock end. I know just measure it myself, it's not here just yet. I need risers and want to try and have them mostly done when it does arrive. The base on the tail stock end is 11 inches wide from JBOLT's measurement, 11.125 on the PM site and 10.8750 from a sketch from John at PM sales, he stated they would have a CAD drawing up on their site shortly but it's been 2.5 months. Those are all close enough for getting the risers completed but I need the bolt hole locations. My plan is I will bolt the machine to the risers and level from the bottom of the risers, I'm copying JBOLT's risers. He is not able to get these measurements due to his machine is in storage. If anyone can help me out I'd much appreciate it. Thanks!
Steve
Steve