12" Van Norman Rotary table - I stole it!

rabler

Addlepated tinkerer
H-M Lifetime Diamond Member
Joined
Feb 25, 2021
Messages
3,271
The construction crew on my new shop brought by three pieces of "scrap" to see it I wanted it.
IMG_4404.JPG
The rotary table is a 12" Van Norman, very little backlash, turns freely. Weighs about 100 lbs. Covered in a film of dust and grease, and no crank, but basically in good shape. The two mill centers were part of the deal.
IMG_4406.JPGIMG_4405.JPG
IMG_4407.JPG
 
When you wrote that you stole it, I wondered how you were able to get away from the scene with a 100lb rotary table :cool:
 
Back
Top