- Joined
- Feb 6, 2015
- Messages
- 45
I'm looking to make a 10F-11 Atlas traverse gear housing for my TH-54 and I'd like to have a model that I can adapt to 3D print.
The traverse gear housings for the 10" lathes were offered in two variations; the 9-11 for models with 5/8" lead screw and no power crossfeed, and the 10F-11 for models with 3/4" lead screw and power crossfeed. I've been able to find 3D models for the 9-11 no problem, but not the 10F-11.
If I can't find one I'll probably start taking measurements of the pieces I have left and reverse engineering one, but it'll take a bit of trial and error so I don't want to re-invent the wheel if it's already been done and there's somewhere I can buy a copy of the file.
Thanks.
The traverse gear housings for the 10" lathes were offered in two variations; the 9-11 for models with 5/8" lead screw and no power crossfeed, and the 10F-11 for models with 3/4" lead screw and power crossfeed. I've been able to find 3D models for the 9-11 no problem, but not the 10F-11.
If I can't find one I'll probably start taking measurements of the pieces I have left and reverse engineering one, but it'll take a bit of trial and error so I don't want to re-invent the wheel if it's already been done and there's somewhere I can buy a copy of the file.
Thanks.