spindle bearing

  1. johanvergeer

    Removing radial and axial play on a Schaublin 13 milling spindle

    I have taken apart my spindle because it was running hot and thankfully the bearings still look good. Now I have to put it back together again, which I would prefer to do the right way so I don't destroy the bearings myself. I did find something in the manual, but it doesn't quite fill in all...
  2. S

    Bad spindle?

    I have a G0776 lathe and have been experiencing a large degree of runout and vibration on the spindle. When a chuck is attached it wobbles to such a degree that I have excess vibrations and can’t make any accurate cuts. I’m wondering what could be causing this. I have taken some videos to help...
  3. L

    Tum 35 Help

    I’m in need to change the spindle bearing on the Tum 35. I’m thinking someone has changed this bearing previously. The spare parts catalog calls for a NN3013k-P51 the bad one currently in my lathe is a NN3013 AS.SP. I can’t seem to locate NN3013k-P51 bearing any where. I don’t know much about...
  4. E

    Info and parts needed for logan 912 11" lathe

    recently acquired a logan 912 in pieces at an estate sale very cheaply. was mostly complete and having assembled it, i am missing a few small pieces and a few bits of information. The spindle seems to be missing two washers, part number LA-1016. i believe they are cone shaped washers that...
  5. A

    Lathe Spindle bearing lubrication

    Hi, I got my first lathe and am just getting into the hobby. The thing is my lathe doesn't have any oil ports for the spindle bearings and i'm not sure how it gets lubricated. I opened the top up to find grease on the bearing that look dried up. I'm not sure if these are sealed angular contact...
  6. cascao

    BV20 lathe Taper bearings upgrade

    This video show how I did the taper roller bearing upgrade in my 9x lathe [VIDEO]
  7. M

    Pm1127vflb Spindle Bearing Noise

    I'm getting a knocking/clicking noise in the headstock after running my 1127 in reverse. I disengaged the change gears and checked the motor so it has to be coming from the spindle. The noise is in time with each rotation of the spindle and is worse when running in reverse. Any advice as to what...
  8. Gary Gill

    I Serviced My 10l Spindle And Need Some Advice Please

    Update: 30JUL16 Spindle is back in the lathe and running fine. Thanks This is long winded but I want to explain what I have done so far. There are questions at the end. Here is where I started. I have a South Bend 10L made late 1960 or early '61. The leather belt drive appears to be old and...
Back
Top