sheldon lathe

  1. WesPete66

    Sheldon lathe ?

    I might have a chance to buy a Sheldon lathe. At this point that is all that is known about the machine, a pic is attached. I will be able to go see it tomorrow night. I'm familiar with lathes, owning an Atlas now, but know nothing about the particulars of Sheldons. Is anybody able to give any...
  2. D

    Sheldon L vs XL - Part Swap

    Going through my recent purchase of a 10in Sheldon L series (Model num UL-44B) i have found i am not a huge fan of the rotating clutch for the power feed. ebay has a apron casting and assembly for a 10in XL lathe, which would effectively convert mine to the throw-lever style clutch 2-pice...
  3. D

    Operation-Parts Manual for 13" & 15" Sheldon Sebastian Lathe 2017-10-07

    This covers the 13" and 15" Sheldon Sebastian lathes manufactured from about 1954 thru about 1965.
  4. wa5cab

    Operations-Parts MAnual for 15" Precision Sheldon Lathe 2019-02-28

    This is for the 15" Precision lathe manufactured from about 1960 thru about 1965 and possibly later. It was replaced with the "R" series lathes around 1964-1965.
  5. N

    New Member - UK - Introduction

    Dear All, I am delighted to be allowed to join the forum. The rules state that I should begin by posting an introduction: I hope that I'm doing this in the correct place. I enjoy making, fixing and exploring things. When I'm not working, or messing around in my home workshop, I grow...
  6. S

    Sheldon Exl-56 Parts

    I'm restoring a Sheldon EXL-56B that had a crash and was knocked over (two separate incidents...I think). I'm in need of the following parts: Bull Gear/Face Gear - 70 Tooth, 6" OD, 2" bore Gear Change Handles and detents All Hand Wheels for the front of the machine Thanks! Jake
  7. D

    Sheldon Lathe

    found a sheldon lathe plate says its a ewq model.12 inch by 54 bed langth,comes with some tooling a 6 jaw chuck 4 jaw chuck and a 3 jaw chuck,lathe seems to run very very smooth and very quiet price is 1200.00 i was looking for a southbend 9 or 10 is this lathe the equivalent,i ran southbend and...
Back
Top