Re: Improved Version: TPI, Feeds, X-Feeds: Generalized Lathe TPI Excel file: "TPI_ManyLathesRev1 N502_1630"
Edit: I re-attached the files. I found a small limitation in the way the macros were written and I have fixed it. See the posting below this one explaining this.
Hi Folks,
I will...
I'm not sure how much interest there is on this forum, but I'm thinking of posting my clock build project here. I've been looking for a long term project and I think I found it. I think I have enough information on clock mechanisms to be dangerous. So, I'll proceed slowly. I expect this project...
I purchased a 1957 Clausing Colchester 13x36 gearhead lathe. My main concern was spindle runout and alignment. I thought that hardened ways would protect the ways.I did not pay enough attention to the head drive gears; bad on me for not checking everything out. The long and the short is there is...
I have a newly rebuilt Delco-Remy starter motor. I want to adapt this motor without altering it in any way to use as a starter motor for my 1940 Witte diesel.
Building a mounting is no problem. My plan is to gear it to another gear (think very small flywheel) that will turn a shaft that will...
Hey all,
I own a mini conquest lathe:
https://www.amazon.co.uk/Chester-Machine-Tools-Hobby-Store/dp/B079S9KRNW
And I have broken two gears that connect the spindle to the autofeed, these are the exact replacements...
I posted this before on another thread.
Just trying to add value to this forum.
It's my way to help other new to gear cutting people like myself I'm posting it here.
Hi, I just picked up a 1984 Honden L-450 mini bench lathe. Looks to be 8 x 18". It's in great condition, minimal- maybe no wear. Having an issue where I cannot get the small V belt to reach across the pulleys for the higher spindle speeds. Seems like the belt is too short or something...
I have a Mikron 132 and have slowly been tooling it up. I just bought a Mod 1.25 hob so now I can make the change gears I am missing.
I am always looking for parts and info on this machine and gear hobbing in general.
Well, starting the new year off right! I'm now the owner of set of Prestech castings of which when finished, will allow me to hob my own gears. There was an auction on eBay over Christmas and I figured what the heck...
There are 11 iron castings manufactured by Preserved Technology LTD., of...
Anybody out there with a 920 or a 922 Logan that can tell me how many teeth the reversing gears have? Also, does anybody know if the DP on the gears on the 11" 920 is 16, or 20?
Thanks all
Cody
This Spreadsheet will allow calculating any gear indexing plate set up. It will calculate all Gear dimensions. It is a spreadsheet on 4 pages. The 3rd page will allow calculating number of teeth up to 127 (Logan Lathe max usage) with any indexing plate or rotary table. Enter the number of...
Hey, folks!
I'm new around here (obviously). I recently found an old South Bend 9" lathe (in pieces) advertised in the local classifieds. I'd wanted a good metal lathe (and had an old 1941 craftsman wood lathe that included a compound slide for "light" metal turning). I saw the ad, and made...
Looking for a couple of items here, first one is a long shot:
1911 14" ATW Tool Room Lathe. I need either the gears from the quick change gear box, or the whole gear box, will take either.
Second one is easy, a full thread 1/2-13, 2 1/2" long bolt for my spindle cap. I can find the bolts in...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.