belt

  1. oskar

    How do we know if the belt is too tight or loose on a mill?

    My mini mill headstock is a Taig ER16 and it’s driven by a Sherline DCV motor. The distance between the 2 pulleys is 3.5” and when I press lightly on the belt at midpoint the belt deflects about 1/8”. When the motor runs the belt wiggles more than it should (to my opinion) but I don’t want to...
  2. M

    South Bend 10K spindle adjustment needed?

    On my SB 10K the leather belt runs true when the lathe is turned on. I notice when I start machining the belt moves about 1/8 of an inch. Always in the same direction. Is this normal, an indication of something wrong, or can an adjustment be made to stop the belt movement? Thanks in advance...
  3. Subwayrocket

    Jet 6x48 Belt/disc Sander , Anyone Familiar With It ?

    I was looking at this Jet 6x48 Belt/Disc sander . I have a Jet JBG-8A grinder and i'm happy with the quality of it , I cant find much on this sander though. Anyone have one , or know someone that does ? If so, what do you have to say about it ? It's a JSG-96 , model 708595 Thanks much , Steve
  4. ex_isp

    New Grinder

    Hey guys! Still at it in the shop/garage... Bought new tool/attachment that I REALLY like! This is a belt grinder with a flat surfacing disk that bolts to a bench grinder on the right side. Has serrated rubber contact wheel for the belt which allows for hollow grinding on my blades with...
  5. brino

    Belt Splicing Instructions - South Bend Bulletin 600 2015-12-12

    South Bend Bulletin 600 "Belt Splicing Instructions"
Back
Top