Enhanced Grizzly G0602/G0752 6 bolt compound clamp originally designed by RJ Sakowski. Entered into FreeCAD by WobblyHand. Uploaded with permission from RJ Sakowski.
www.hobby-machinist.com
RJ Sakowski recommended including the following link:
www.hobby-machinist.com
Complete 3D model, with internal spreadsheet. Design is spreadsheet driven. You can create your own Technical Drawings from the FreeCAD file using TechDraw. Original drawings came from the Additional information URL.
Design and build of a Rear Mount Parting Tool for a G0752Z (G0602) Lathe
Here is the rough location of the plinth. Marked the cross-slide in red. Top left corner. Here is the plinth body (unmachined and too tall) and a rough idea of the locating feature. I suppose I could put something in back, but it is probably not necessary. Ignore the scrap I used to hold up...
www.hobby-machinist.com
RJ Sakowski recommended including the following link:
Improved G0602 Compound Clamp
Several years ago, I designed a beefed up compound clamp for the Grizzly 9 x 19 lathe, based upon several designs I had seen on various websites. When I got my G0602, the first improvement that I made was to replace its compound clamp. I made the clamp from a piece of 5/8" steel plate the...
www.hobby-machinist.com
Complete 3D model, with internal spreadsheet. Design is spreadsheet driven. You can create your own Technical Drawings from the FreeCAD file using TechDraw. Original drawings came from the Additional information URL.