Designed by Bryan Lund. Used on an Atlas MFC. The base is designed to fit on the full width of the milling machine table. The location of the keyway is noted in the print and the width of the keyway is 3/8" and fits the mill table t-slot. Use 3/4" long 5/16-18 flat head screws to secure the angle plates to the table using 3/8" t-nuts.
The drawing shows a one piece plate of 12" long. The plate in practice is split vertically in two pieces, yielding two, 6" wide angle plates.
The drawing shows a one piece plate of 12" long. The plate in practice is split vertically in two pieces, yielding two, 6" wide angle plates.
