This is the lock nut socket I used. I had to modify mine to fit the slots in the nut. As the "teeth" on the socket were too thick.
You'll have to hold the bull gear in a way that allows you to tighten the lock nut. I clamped down with a c-clamp and a chunk of wood to the bench.
The socket fits pretty nicely into the sleeve after modifying the "teeth"
The lock nut socket I used.
This is the lock nut socket I used. I had to modify mine to fit the slots in the nut. As the "teeth" on the socket were too thick.
Install the locking nut using a lock nut socket. See the next few pictures.
Lock nut side view for holding the bull gear bearing sleeve in place.
Lock nut top down view for holding the bull gear bearing sleeve in place.
expressline99

This is the lock nut socket I used. I had to modify mine to fit the slots in the nut. As the "teeth" on the socket were too thick.

Media information

Album
Bridgeport Series 1 VS 2hp Rebuilding the Gear Housing
Added by
expressline99
Date added
View count
572
Comment count
0
Rating
0.00 star(s) 0 ratings

Image metadata

Device
NIKON COOLPIX S560
Aperture
ƒ/5.6
Focal length
6.3 mm
Exposure time
1/60 second(s)
ISO
200
Flash
Auto, fired
Filename
DSCN5321.JPG
File size
2.2 MB
Date taken
Sun, 02 April 2017 6:09 PM
Dimensions
3648px x 2736px

Share this media

Back
Top