Spindle nose piece showing the set screw and the set screw countersink.
Tighten the spindle nose piece on with the set screw once aligned. Test the spindle to make sure it spins without binding.
Install the spindle nose piece. You will probably have to back off the nose piece to get it to align with the counter sink in the threads.
Quill view showing where the set screw for the spindle nose piece goes. It's on the back of the quill.
Spindle nose piece showing the set screw and the set screw countersink.
Spindle nose piece assembly with set screw.
Install your spindle. Make sure it's clean and becareful when feeding it in to get it through the middle of the felt washer at the top of the quill.
The installed depth scale.
expressline99

Spindle nose piece showing the set screw and the set screw countersink.

Media information

Album
Bridgeport Series 1 VS 2hp lower end putting it back together.
Added by
expressline99
Date added
View count
923
Comment count
0
Rating
0.00 star(s) 0 ratings

Image metadata

Device
NIKON COOLPIX S560
Aperture
ƒ/5.6
Focal length
6.3 mm
Exposure time
1/30 second(s)
ISO
200
Flash
On, fired
Filename
DSCN5265.JPG
File size
2.1 MB
Date taken
Sat, 01 April 2017 5:38 PM
Dimensions
3648px x 2736px

Share this media

Back
Top