Now you need to press out or tap out your bearings for replacement.
As you unscrew the adjustment screw it will pull the table gib with it. The screw sits in a slot on the side of the gib.
Believe it or not this is where the table gib adjustment screw is... take it out.
The bearing numbers for this feed screw.
Now you need to press out or tap out your bearings for replacement.
At this point you can remove the feed screw if you have removed the handle/power feed on the right side of the unit.
The end of the feed screw.
Another view of the feed screw.
expressline99

Now you need to press out or tap out your bearings for replacement.

Media information

Album
Bridgeport Series 1 VS 2hp Tear down of the table and saddle
Added by
expressline99
Date added
View count
576
Comment count
0
Rating
0.00 star(s) 0 ratings

Image metadata

Device
NIKON COOLPIX S560
Aperture
ƒ/5.6
Focal length
6.3 mm
Exposure time
1/60 second(s)
ISO
200
Flash
Auto, fired
Filename
DSCN6011.JPG
File size
2.2 MB
Date taken
Sun, 06 August 2017 5:01 PM
Dimensions
3648px x 2736px

Share this media

Back
Top