Lower bearing showing the matching V markings. You will use this to align the bearings facing the proper way and as they were matched.
Installing the spacers view one
Installing the spacers view two.
Lube everything and slide the spacers into place. Line up the marks that you placed on the spacer with the V on the bearing.
Lower bearing showing the matching V markings. You will use this to align the bearings facing the proper way and as they were matched.
I marked the outside of the outer bearing spacer using a square in order to line up the marks on the matched bearings.
Next install the inner and outer bearing spacers.
Close up lower spindle bearing installed with shaft.
expressline99

Lower bearing showing the matching V markings. You will use this to align the bearings facing the proper way and as they were matched.

Media information

Album
Bridgeport Series 1 VS 2hp Spindle rebuild & tear down
Added by
expressline99
Date added
View count
1,105
Comment count
0
Rating
0.00 star(s) 0 ratings

Image metadata

Device
NIKON COOLPIX S560
Aperture
ƒ/3.5
Focal length
6.3 mm
Exposure time
1/27 second(s)
ISO
400
Flash
Off, did not fire
Filename
DSCN5232.JPG
File size
2.2 MB
Date taken
Thu, 30 March 2017 7:43 PM
Dimensions
3648px x 2736px

Share this media

Back
Top