Connect the chain to the speed change plate like this using the t-bolt and the cotter key. Be sure and bend at least one leg out on the cotter key.
Time to install the speed indicating dial. I bought a new one the other was really worn and hard to read.
The chain from the speed change drum should be like this or have it's pivot point on the drum slightly left as you look at it.
The other end of the speed change plate has to be connected with a cotter key and a Hardened washer to the end of the plate adjusting screw.
Connect the chain to the speed change plate like this using the t-bolt and the cotter key. Be sure and bend at least one leg out on the cotter key.
This is how the t-bolt goes through the speed change plate.
T-bolt(?) and cotter key to install the speed change plate. Yes I know I should have replaced this key.
The speed change assembly is attached to the upper belt housing using two socket head screws. The fins go towards the Bridgeport lettering.
expressline99

Connect the chain to the speed change plate like this using the t-bolt and the cotter key. Be sure and bend at least one leg out on the cotter key.

Media information

Album
Bridgeport Series 1 VS 2hp Upper belt housing tear down and rebuild
Added by
expressline99
Date added
View count
1,182
Comment count
0
Rating
0.00 star(s) 0 ratings

Image metadata

Filename
DSCN5711.JPG
File size
52.6 KB
Dimensions
600px x 450px

Share this media

Back
Top